Features of 6018 Pipeline Detector
(1) Multiple functions
1. Transmitter function: It has three signal application modes: induction method, direct method and clamp method, suitable for different occasions.
2. Receiver function: It is used to measure the position, direction, buried depth of underground pipelines and cables and current in the pipeline.
3. The left and right positioning arrows indicate the location of the target pipeline, which is fast and accurate; the front and back arrows and the dB value indicate the location and size of the damaged point of the anti-corrosion layer.
4. With backlight function, it is suitable for night rescue use.
5. GPS geolocation function, automatic mapping of pipeline direction.
6. Professional data analysis software, automatic generation of inspection reports.
7. SENNR-6018E receiver's unique function: used for fault location (pipeline fault refers to the damage of the outer anticorrosion layer, cable fault refers to the damage of the outer sheath), and to detect the insulation damage of underground pipelines.
8. Current measurement: measure the current applied by the transmitter to the pipeline under test.
9. Multimeter function: can measure output voltage, line voltage, line current, impedance and power. Test the continuity and insulation quality of the cable before and after the cable fault finding.
10. External inductive clamp: suitable for places where the signal cannot be directly connected when detecting cables.
(2) High positioning accuracy:
Multiple measurement modes for pipeline positioning (valley mode, peak mode, broad peak mode, peak arrow mode) can be mutually verified to ensure the accuracy of pipeline positioning.
1. Maximum value method: The peak mode, broad peak mode, and peak arrow mode can be used to determine the changes in the horizontal component (H X) or the horizontal gradient (?H X), and locate according to the position of the maximum value;
2. Minimal value method: Use the valley mode to locate the position according to the minimum value by measuring the change of the vertical component (HZ).
(3) There are many sounding methods:
There are a variety of sounding methods that can be selected at will and can be mutually verified.
1. Direct reading method with double horizontal coils;
2. Single-level coil 80% method, 50% method;
3. The 45-degree method.
(4) Strong anti-interference
1. Many observation parameters: both horizontal component (H X ), vertical component (HZ) and horizontal gradient (?H X) can be measured.
2. Large transmitting power: The output power of the transmitter is up to 10W and is continuously adjustable, which can be selected arbitrarily according to needs.
3. Multiple working frequencies: Transmitter frequency: 128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, 83KHz. Receiver frequency: radio, 50Hz, 100Hz, 128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, 83KHz.
According to the characteristics of the target pipeline (material, structure, buried depth, length, etc.) and environment, select the appropriate working frequency.
(5) Easy to operate
1. Intuitive: The graphic display is used to continuously and real-time display various parameters and signal strength during the detection process.
2. Automatic: Automatically switch to dual-level antenna mode when measuring depth and automatically adjust the receiver sensitivity to achieve the best measurement signal. After the sounding is completed, it will automatically return to the working mode before sounding.
(6) Long continuous working time and low cost of use The transmitter is equipped with a large-capacity lithium battery pack, which can meet the needs of one working day for field detection and can be recycled, which greatly reduces the cost of detection.
(7) Transmitter AC and DC dual purpose Under normal circumstances, if the transmitter battery is sufficient, use the built-in battery pack for power supply. If the battery of the transmitter is insufficient during use, but the detection task is not completed, you can directly connect an external dedicated power adapter, and the instrument can be used normally, instead of waiting for the instrument to be fully charged before use.
Technical parameters of SENNR-6018 series pipeline detector
(1) Receiver
Positioning accuracy: ±5% of depth
Depth measurement accuracy: ±5% of depth (no adjacent pipeline interference)
Current measurement accuracy: ±5% of actual current
Depth measurement range: <6 meters
Working mode: valley mode, peak mode, wide peak mode, peak arrow mode
Working frequency: radio, 50Hz, 100Hz, 128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, 83KHz (the working frequency is slightly different according to the product specifications)
Menu setting: Chinese and English setting menu.
Working temperature: -20℃~+50℃
Battery: 7.4V lithium battery
Dimensions: 595mm×136mm×238mm
Weight: 1.6Kg (including battery)
(2) Transmitter
Output power: 10W
Working frequency: 128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, 83KHz
(The working frequency varies slightly depending on the product specifications and models)
Working mode: three modes of direct connection, induction and clamping automatically switch
Battery: 14.8V built-in lithium battery pack
Working temperature: -20℃-+50℃
Dimensions: 348mm×228mm×84mm
weight: 2.5Kg (including battery).
New 3d metal detector
- Brand: Metal-Detector
- Product Code: New 3d metal detector
- Availability: In Stock
-
$3,052.17
- Ex Tax: $3,052.17
Tags: New 3d metal detector